http://www.ti.com/general/docs/suppproductinfo.tsp?distId=26&gotoUrl=https%3A%2F%2Fwww.ti.com%2Flit%2Fpdf%2Fsnvu760″>View Datasheet

Texas Instruments TPS3704Q1EVM Evaluation Module (EVM)

Texas Instruments TPS3704Q1EVM Evaluation Module (EVM) is a platform for evaluating the TPS3704-Q1, which is a multi-channel window supervisor and reset IC in a SOT-23 (DDF) package. TPS3704Q1EVM monitors single-, dual-, triple-, and quad-voltage rails. The input voltage for the evaluation module operates up to 6V. This evaluation module can be used with any TPS3704x-Q1 device variants in the DDF package. Test points are provided to give the user additional access, if needed, for an oscilloscope or multimeter measurements.

The Texas Instruments TPS3704Q1EVM comes pre-populated with TPS37044A7OHDDFRQ1. This option is capable of monitoring four distinct input voltage rails and outputting an active-low RESET signal on RESET1 and/or RESET2, depending on the state of the input voltages. If users need a different option, the existing device must be removed from the board and replaced. The evaluation module is designed to support all possible options by changing jumper configurations.

Features

Accommodates multiple channel variants (single-, dual-, triple-, and quad-voltage monitoring)
Operates different output topologies (open-drain or push-pull)
Monitors direct voltage rail or monitored voltage can be divided down

Option to use different pull-up voltage on all /RESET outputs via jumper
Optional input voltage monitoring with RC input filter (via jumpers) for noise suppression
8-pin SOT-23 DDF package

Texas Instruments TPS3704Q1EVM Evaluation Module (EVM)

Features

husseinkey ELECTRONICS®

COMPANY