Teledyne FLIR Lepton 2.5 LWIR Micro Thermal Camera Module

Teledyne FLIR Lepton 2.5 LWIR Micro Thermal Camera Module offers a focal plane array of 80 x 60 active pixels, 17µm pixel size, and <50mK thermal sensitivity. The radiometric design of this camera module captures accurate, calibrated, and noncontact temperature data in every pixel of each image for greater utilization in commercial applications. This module features a CCI (I²C-like) control port and video over SPI video data interface. Teledyne FLIR Lepton 2.5 LWIR Micro Thermal Camera Module is equipped with thermal imaging and has potential in the areas of safety, temperature measurement, and presence detection.

Features

Integrated digital thermal image processing
Greater sensitivity than common thermopile arrays
Temperature-stabilized output for radiometric processing
Low operating power
Low power standby mode

Industry-standard 50° FOV
Fast time to image (<0.5s)
Uses standard cell phone-compatible power supplies
Two-wire serial control interface and 32-pin socket interface to connector
Compatible with the 105028-1001 socket from Molex

Applications

Automotive
Safety
Temperature measurement
Presence detection
Process control

Robotics
Smart cities
Smart buildings
Mobile
IoT

Specifications

Uncooled Vox microbolometer
Radiometrically calibrated
80 × 60 progressive scan array format
LWIR, 8µm to 14µm
Accuracy
- ±5% or +5°C (high gain)
- ±10% or +10°C (low gain)

50° HFOV
17µm pixel size
8.6Hz effective frame rate
<50mK thermal sensitivity
-10°C to +450°C scene dynamic range

Teledyne FLIR Lepton 2.5 LWIR Micro Thermal Camera Module

Features

Applications

Specifications

husseinkey ELECTRONICS®

COMPANY