STMicroelectronics STEVAL-IFP043V1 Expansion Board

STMicroelectronics STEVAL-IFP043V1 Expansion Board offers a powerful and flexible environment to demonstrate the IPS2050H dual high-side smart power solid state relay. The IPS2050H is ideal for evaluating a digital output module connected to 2.5A (max.) industrial loads.

The STM STEVAL-IFP043V1 Expansion Board interfaces with the microcontroller on the STM32 Nucleo through 5kV optocouplers driven by GPIO pins, Arduino UNO R3 (default configuration), and ST morpho (optional, not mounted) connectors. The expansion board allows a connection to either a NUCLEO-F401RE or NUCLEOG431RB development board. Up to four stacked STEVALIFP043V1 expansion boards can be used to evaluate a system. For example, a system with four STEVAL-IFP043V1 expansion boards permits users to assess an eight-channel digital output module with 2.5A (max.) capability each.

Features

Based on the IPS2050H dual high-side switch, which features:
- Operating range up to 60V/2.5A
- Low-power dissipation (R_ON(MAX) = 50mΩ)
- Fast decay for inductive loads
- Smart driving of capacitive load
- Under-voltage lock-out
- Per-channel overload and over-temperature protections
- QFN48L 8mm x 6mm package
8V to 33V/0A to 2.5A Application board operating range
Extended voltage operating range (J3 open) up to 60V

Green LEDs for output on/off status
Red LEDs for per-channel diagnostic (overload and overheating)
5kV galvanic isolation
Supply rail reverse polarity protection
Compatible with STM32 Nucleo development boards
Equipped with Arduino UNO R3 connectors
CE certified
RoHS and China RoHS compliant
Not FCC approved for resale

STMicroelectronics STEVAL-IFP043V1 Expansion Board

Features

Layout

husseinkey ELECTRONICS®

COMPANY