SparkFun MicroMod GNSS Carrier Board (ZED-F9P)

SparkFun MicroMod GNSS Carrier Board allows for adding GNSS Real Time Kinematics (RTK) for accuracy to millimeters. The device has the flexibility of the MicroMod’s M.2 connector to test and swap different MicroMod processor boards. The board allows for solderless access to the ZED-F9P module’s features via UART1, UART2, SPI, and I²C ports.

Features

Concurrent reception of GPS, GLONASS, Galileo, and BeiDou
Receives both L1C/A and L2C bands
Input Voltage 5V or 3.3V but all logic is 3.3V
Built-in Resettable PTC Fuse (Rated 5V/2A)
AP7361C 3.3V Voltage Regulator (Rated 1A)
ZED-F9P Current Consumption 68mA – 130mA (varies with constellations and tracking state)
Time to First Fix 25s (cold), 2s (hot)
Max Navigation Rate
- PVT (basic location over UBX binary protocol) – 25Hz
- RTK – 20Hz
- Raw – 25Hz
Horizontal Position Accuracy
- 2.5m without RTK
- 0.010m with RTK
Operational Limits
- Max G ≤4G
- Max Altitude 50km (49.7 miles)
- Max Velocity 500m/s (1118mph)
1mAh battery backup for RTC
Buttons
- Reset
- Boot

LEDs
- Power
- 3.3V
- PPS
- RTK
- GEO
Jumpers
- VIN
- MEAS
- BYP
- EN
- 3.3V
- PPS
- RTK
- GEO
Connectors and Ports
- 1x M.2 (Solderless access to ZED-F9P via UART1, UART2, SPI, and I²C)
- 1x Qwiic
- 2x USB Type C (Programming Processor Board, Configuring ZED-F9P module)
- 2x SMA (GNSS Antenna, PPS*)
- 2×5 Bare SWD for MicroMod Processor Board
Phillips #0 M2.5x3mm screw included
Board Dimensions 2.60″ x 2.24″ (66.04mm x 56.89mm)

SparkFun MicroMod GNSS Carrier Board (ZED-F9P)

Features

husseinkey ELECTRONICS®

COMPANY