Seeed Studio Dragino LoRaST IoT Module with LoRa Technology

Seeed Studio Dragino LoRaST IoT Module with LoRa Technology features long-range, low-power consumption and secure data transmission. The module can be used to quickly deploy industrial-level LoRa and IoT solutions. The device is easy to program and can be used to create and connect things everywhere. LoRaST’s wireless part is based on the SX1276/SX1278. This allows for sending data at long ranges and at low data rates.

Features

STM32L072CZT6 MCU
SX1276/78 LoRa Wireless Modem
Pre-loaded with ISP bootloader
I²S, I²C, LPUSART1, SPI2, USB
22 x Digital I/Os
3 x 12-bit ADC; 1 x 12-bit DAC
MCU wakes up by UART or Interrupt
LoRa™ Modem
Preamble detection
Baud rate configurable

LoRaWAN 1.0.2 Specification
Software is based on STM32Cube HAL drivers
Open-source hardware/software
Available band:868MHz
External antenna via I-Pex 4 connector
Ultra-low power consumption
AT commands to setup parameters
Industrial-standard M.2 (NGFF) interface

Seeed Studio Dragino LoRaST IoT Module with LoRa Technology

Features

husseinkey ELECTRONICS®

COMPANY