NXP Semiconductors KITFS84SKTEVM Evaluation Board

NXP Semiconductors KITFS84SKTEVM Evaluation Board provides configuration of the FS84 QFN48EP fail-safe system basis chip with multiple SMPS and LDO. The devices are easily placed on a socket, fused, and then soldered on a prototype board. It targets 12V automotive applications. The kit is connected to the FlexGUI software, which allows modification of the registers and developing a one-time programming (OTP) configuration and burns when ready. In addition to OTP programming, it can test all features (with some limitations due to the socket). The OTP can burn 3 times.

Features

VBAT power supply connectors (Jack and Phoenix)
VPRE output 3.3V, 4.1V, and 5V
VBUCK1
VBUCK3
VBOOST 5.0V or 5.74V, up to 400mA
LDO1 and LDO2, from 1.1V to 5V, up to 400mA
Ignition key switch
FS0B external safety pin

Embedded USB connection for easy connection to software GUI (access to SPI bus, IOs, RSTB, FS0B, INTB, Debug, MUX_OUT, regulators)
LEDs indicating signal or regulator status
Supporting OTP fuse capabilities
USB connection for register access, OTP emulation, and fuse.
Note that due to the socket, all output current should be limited to 1A maximum

NXP Semiconductors KITFS84SKTEVM Evaluation Board

Features

husseinkey ELECTRONICS®

COMPANY