NXP Semiconductors KITFS84AUTEVM Evaluation Board

NXP Semiconductors KITFS84AUTEVM Evaluation Board is used to evaluate the FS84 QFN48EP devices, targeting 12V automotive applications. The kit is connected to the FlexGUI software. This allows modification of the registers and developing a one-time programming (OTP) configuration. Then, the FS84 QFN48EP chip on the board is programmed. This offers flexibility to configure the OTP for application needs. The OTP can be burned 3 times.

Features

VBAT power supply connectors (Jack and Phoenix)
VPRE output 3.3V, 4.1V, and 5V
VBUCK1
VBUCK3
VBOOST 5.0V or 5.74V, up to 400mA
LDO1 and LDO2, from 1.1V to 5V, up to 400mA
Ignition key switch

FS0B external safety pin
Embedded USB connection for easy connection to software GUI (access to SPI bus, IOs, RSTB, FS0B, INTB, Debug, MUX_OUT, regulators)
LEDs indicating signal or regulator status
Supporting OTP fuse capabilities
USB connection for register access, OTP emulation, and fuse

NXP Semiconductors KITFS84AUTEVM Evaluation Board

Features

husseinkey ELECTRONICS®

COMPANY