Fanstel LR62E LoRa Modules

Fanstel LR62E LoRa Module LR62E LoRa transceiver modules use a Semtech SX1262 sub-GHz radio transceiver. An u.FL connector is on-board for an external antenna. It’s paired with the Fanstel BM833 low-cost Nordic nRF52833 BLE 5.1 module. The Cortex M4F MCU in BM833 manages LR62E through an SPI interface. BM833 GPIOs can be used for sensor data input or control output. Android OS app is available for field set up through Bluetooth interface. BM833 + LR62E pair can be used in a LoRaWAN™ application. LoRaWan stacks are not available from Fanstel.

Features

12 bit/200KSps ADC, 8 configurable channels with programmable gain
Type 2 near field communication (NFC-A) tag
64 level comparator
15 level low power comparator with wake-up from system OFF mode
3x 4-channel pulse width modulator (PWM) units with EasyDMA
5x 32-bit timers with counter mode
Up to 3x SPI Master/Slave with Easy DMA
Up to 2x I²C compatible 2-wire master/slave
UART (CTS/RTS) with EasyDMA

Programmable peripheral interconnect (PPI)
Quadrature Demodulator (QDEC)
3x real-time counter (RTC)
Miscellaneous
Operation voltage: 1.7V to 3.6V
Peak current: 5.4mA RX, 7.5mA TX at +4dBm.
0.4uA OFF mode, 1.8uA idle
Operation Temperature: -40°C to +85°C
Sizes: 10.2x15x1.9mm
Integrated shield to resist EMI

Fanstel LR62E LoRa Modules

Features

husseinkey ELECTRONICS®

COMPANY