Delta Electronics CliQ M DC-UPS Modules

Delta Electronics CliQ M DC-UPS Industrial DIN Rail Modules are offered with a 24V output voltage in 10A, 20A, or 40A output current models. These devices feature a 150% power boost function at both the main operation mode and battery operation mode. The CliQ™ M DC-UPS Modules have a wide 18V to 30V input voltage range and a -30°C to +70°C temperature range. The DC-UPS modules come with potential-free contacts for battery management signals and an LED indicator for battery status. Battery temperature protection will stop charging/buffering the battery under low and high-temperature conditions to extend battery life.

Features

Full corrosion-resistant aluminum casing
Suitable for 24V system
Built-in diagnostic monitoring for battery ready, buffering, and replace battery by relay contacts
LED indicator for battery ready, battery fail, DC input, battery reverse polarity, and battery buffering

Selectable charging current
Selectable buffering time to prevent battery over-discharge
Battery temperature protection to extend battery life
Conformal coating on PCBAs to protect against common dust and chemical pollutants
CB Certified for worldwide use

Applications

Industrial automation
Factory automation
Machine automation

Specifications

18V_DC to 30V_DC input voltage range
98% typical efficiency
24V_DC typical output voltage
Output current range
- 10A to 40A maximum
- 15.0A to 60.0A maximum for 7 seconds with power boost
Output power range
- 240W to 960W maximum
- 360W to 1440W maximum for 7 seconds with power boost
7-second typical power boost duration
5-second typical power boost recovery time
Nominal battery voltage
- 24V_DC, SLA sealed lead acid battery
- 2x 12V_DC, SLA sealed lead-acid battery in series
Battery discharging voltage range
- 21V_DC to 27.6V_DC
- 30V_DC maximum (the maximum voltage that will not cause damage to the unit)
3.5AH to 12AH battery capacity
15s, 30s, 45s, 1 minute, 2 minutes, 3 minutes, 5 minutes, 10 minutes, and 20 minutes buffering times
27.6V end-of-charge voltage
<200mA battery current consumption
Aluminum case cover/chassis

Convection cooling system
Standard TS35 DIN rail mounting in accordance with EN 60715
<40dBa sound pressure level (SPL) (1 meter from the power supply)
Temperature ranges
- -30°C to +70°C operating (-40°C cold start)
- -40°C to +85°C storage
>+60°C output de-rating power by 2.5%
5% to 95% relative humidity, non-condensing
0 to 6,000m operating altitude range
Pollution Degree 2
Protections
- Overload
- Overcurrent
- Short (at system)
- Over-temperature
- Overvoltage
- Insufficient input voltage
- Input polarity
- Battery polarity
- Wrong battery voltage
- Battery temperature
- Battery deep discharge
IP20 degree of protection
Class III protection against shock
>500,000 hours MTBF as per Telcordia SR-332

Delta Electronics CliQ M DC-UPS Modules

Features

Applications

Specifications

Videos

husseinkey ELECTRONICS®

COMPANY