Analog Devices / Maxim Integrated MAX25430A Evaluation Kit

Analog Devices MAX25430A Evaluation Kit is a platform for designing rapid evaluation with reduced test and firmware-development time. The MAX25430A evaluation kit (EV kit) demonstrates the MAX25430A automotive-grade buck-boost controller capable of driving up to 5.0A. The device has legacy USB Charging support and USB Type-C™ protection for USB host or DFP applications. The MAX25430A provides CC signal passthrough protection for the Infineon Technologies CCG3PA USB-PD controller.

Features

100W USB-PD REV3.0 Source Charger Solution using a Infineon PD Controller
Legacy USB 2.0 Charging Support—Meets MFi R3x
Register Set Accessible with Feather Board and GUI
Test Points Available for Signal and Converter Analysis

EV Kit is Ready for Factory IC Option with Customer Cable Shield Short-to-Battery Protection
Proven PCB Layout
Fully Assembled and Tested

Kit Contents

MAX25430_EVKIT_P3_00 board is referred to as MAX25430A EV Kit Board
MAXPD_CY01_APPS_A board is referred to as PD Controller Board

MAXPD_FTHR_APPS_B board is referred to as Feather Board
6ft USB Type-C 5A Cable

Required Equipment

● MAX25430A EV Kit Board
● PD Controller Board
● 6ft USB Type-C Cable
● 14V/10A DC Power Supply or car battery (VBAT)
● Digital voltmeter (DVM)
● Device with Type-C port for charging

Analog Devices / Maxim Integrated MAX25430A Evaluation Kit

Features

Kit Contents

Required Equipment

husseinkey ELECTRONICS®

COMPANY