Analog Devices Inc. EVAL-ADM2463EEBZ Evaluation Board

Analog Devices Inc. EVAL-ADM2463EEBZ Evaluation Board evaluates the ADM2463E 500kbps, 5.7KV_RMS, full-duplex RS-485 transceivers with ±15kV IEC ESD. This evaluation board comes with two on-board ADP7104 Low Dropout (LDO) regulators that accept 20V input voltage. The board features output of selectable supply voltages to the V_DD1 pin and V_DD2 pin and are configurable via jumper options. These LDO regulators can be bypassed to power the ADM2463E and ADM2763E V_DD1 supply pins and V_DD2 supply pins directly from an external power supply. The EVAL-ADM2463EEBZ Evaluation Boards consist of footprints for the ADM2463E and full-duplex, signal isolated, RS-485 transceivers in a 10.10mm × 10.0mm, 16-lead, standard small outline, widebody (SOIC_W) package.

Features

Simplified evaluation of the ADM2463E signal isolated, 500kbps, full-duplex RS-485 transceiver
2-layer PCB compliant to EN 55032 Class B radiated emissions
Footprint for standard full-duplex, 16-lead, SOIC_W package with >8mm creepage and clearance
On-board ADP7104 LDO regulators with jumper options for simplified evaluation in multiple supply configurations
SMA connector for TxD input signal

Optional on-board LTC1799 oscillator for providing TxD signal
Screw terminal blocks for connecting power, digital, and RS-485 signals
Jumper-selectable enable and disable for digital input signals
Resistors and footprints for termination and loopback test
Test points for measuring all signals

Specifications

Flexible, low voltage V_DD1 supply rail for interfacing with I/O nodes as low as 1.7V
Wide bus voltage V_DD2 supply rail from 3V to 5.5V

IEC 61000-4-2 ESD protection on the A pin, B pin, Y pin, and Z pin
≥±12kV contact discharge and ≥±15kV air discharge

Analog Devices Inc. EVAL-ADM2463EEBZ Evaluation Board

Features

Specifications

husseinkey ELECTRONICS®

COMPANY