TE Connectivity / Schrack Force Guided Relays SR6 Next Generation

TE Connectivity’s (TE) Schrack Forced Guided Relays SR6 Next Generation (SR6nG) features force-guided contacts that monitor contact state with 99% diagnostic coverage, which is ideal for designing safety circuits. The contacts are insensitive to voltage peaks and can withstand short-circuit currents up to 450A. TE Schrack Forced Guided Relays SR6nG offers a minimum contact load of 5V/1mA, which allows direct monitoring through controller input, and a sensitive monostable magnetic coil system to reduce heat generation.

Features

Contacts withstand short-circuit currents up to 450A
15.7mm relay height, best fit in 22.5mm DIN rail housing
5V/1mA minimum contact load
Sensitive monostable magnetic coil system
Six force-guided contacts

Circuits up to 400V can be connected
Up to 8A or 2200VA switching per contact
Creepage and clearance distances allow reinforced isolation
Six pole version with three contact sets (3NO/3NC, 4NO/2NC, 5NO/1NC)
700mW sensitive coil allows use at 85°C

Applications

Safety relay modules
Safety controllers, PLCs
Machines, presses, robots

Emergency shut-off, light barriers
Elevator and escalator safety control
Railway level crossings, signaling

Specifications

IEC 60947-4-1: AC1-8A/250V 100k cycles at 85C
EN 60947-5-1: AC15-5A/230V; DC13-6A/24V (NO)
UL 61810: 8A GP, B300; R300 at 85°C

55mm length x 16.5mm width x 15.7mm height
IEC-60068-2 shock and vibration resistance

TE Connectivity / Schrack Force Guided Relays SR6 Next Generation

Features

Applications

Specifications

husseinkey ELECTRONICS®

COMPANY