• support@husseinkey.com
  • livechat
contact us

Renesas Electronics RZ/A3UL Evaluation Kit

Renesas Electronics RZ/A3UL Evaluation Kit is ideal for evaluating the RZ/A3UL. The kit comprises a module board (SOM) and a carrier board. The carrier board can be used with RZ/G2UL, RZ/Five, and RZ/G2L modules (SOM) prepared according to the SMARC v2.1 standard. This allows a seamless and flexible evaluation between these devices.

Features

  • Device RZ/A3UL
    • Cortex-A55 Single
    • BGA361pin, 13mmSq body, 0.5mm pitch
  • Module Board Function
    • Two types of evaluation boards are available
      • QSPI version QSPI Serial Flash (Boot) + DDR4
      • Octal-SPI version Octa Flash (Boot) + OctaRAM + DDR4
    • DDR4 SDRAM 1GB × 1pc
    • QSPI flash memory 128Mb × 1pc “AT25QL128A” (QSPI version)
    • Octa RAM memory 512Mb × 1pc / Octa flash memory: 1Gb × 1pc (Octal-SPI version)
    • eMMC memory 64GB × 1pc
    • The microSD card slot is implemented and used as an eSD for boot
    • 5-output clock oscillator “5P35023” implemented
    • PMIC power supply “DA9062” implemented
  • Carrier Board Function
    • The FFC/FPC connector is mounted as standard for connection to the high-speed serial interface for the camera module
    • The Micro-HDMI connector via DSI/HDMI conversion module is mounted as standard for connection to a high-speed serial interface for a digital video module
    • The Micro-AB receptacle (ch0: USB2.0 OTG) and A receptacle (ch1: USB2.0 Host) are respectively mounted as standard for connection to the USB interface
    • The RJ45 connector is mounted as software development and evaluation standard using Ethernet.
    • The audio codec is mounted as a standard for advanced audio system development
    • The audio jack is implemented for connection to audio interface
    • The CAN connector is implemented for connection to the CAN-Bus interface
    • The Micro-AB receptacles are implemented for connection to the asynchronous serial port interface
    • The microSD card slot and two sockets for PMOD are implemented as an interface for RZ/G2L peripheral functions
    • A mounted USB Type-C™ receptacle supports the USB PD standard for power supply.

Resources

  • Carrier Board User Manual
  • Module Board User Manual
  • Start-Up Guide

Module Board Layout

Renesas Electronics RZ/A3UL Evaluation Kit

Carrier Board Layout

Renesas Electronics RZ/A3UL Evaluation Kit

Setup Example

Renesas Electronics RZ/A3UL Evaluation Kit

husseinkey ELECTRONICS®

  • supptor@husseinkey.com
  • Live Chat

COMPANY

  • Privacy Center
  • Terms and Conditions
  • Accessibility
  • Sitemap
  • xxxxxxxxxxxx
  • admin@admin.com
  • livechat
Renesas Electronics RZ/A3UL Evaluation Kit