Mini-Circuits ZHL Series Amplifiers

Mini-Circuits ZHL Series Amplifiers offer 100W maximum power, 50Ω impedance, and a frequency of up to 4200MHz. These amplifiers feature wide bandwidth capability that supports a broad range of systems, test lab applications, and much more. Mini-Circuits ZHL Series Amplifiers are suitable for various applications, including test equipment, laboratory use, VHF transmissions, instrumentation, and defense environments.

Features

ZHL-2-8/X
- Wideband, 10MHz to 1000MHz
- Medium power, +30dBm P3dB
- High gain, 34dB
- Excellent gain flatness, ±0.8dB
- High IP3, +42dBm
ZHL-30W-252/X-S+
- Wideband, 600MHz to 2500MHz
- High gain, 50dB
- Excellent gain flatness, ±1.0dB
- High IP3, +38dBm
ZHL-4240W+
- Wideband, 10MHz to 4200MHz
- High IP3, +38dBm typ.
- High gain, 39dB min.
ZHL-2010+
- Wideband, 50MHz to 1000MHz
- Low noise, 3.7dB typ.
- High IP3, +46dBm typ.
- High IP2, 68dBm to 83dBm typ.
ZHL-10M4G21W0+ and ZHL-10M4G21W0X+
- Broadband, 10MHz to 4200MHz
- High gain, 37dB typ.
- High P1dB, +32dBm, typ.
- High OIP3, +44dBm typ.
ZHL-5W-202/X-S+
- Saturated power, 5W
- Wide bandwidth, 10MHz to 2000MHz
- High gain, 50dB typ.
- Self-protected from excessive drive, heat, and reverse polarity
- Withstands short and open circuit at output while delivering up to 5W
ZHL-10W-202/X
- Saturated power, 10W
- Wide bandwidth, 10MHz to 2000MHz
- High gain, 50dB typ.
- Self-protected from excessive drive, heat, and reverse polarity
- Withstands short and open circuit at output while delivering up to 10W
ZHL-32A+
- Medium high power, 29dBm min.
- High IP3, +38dBm typ.

ZHL-2150+
- L-band, 950MHz to 2450MHz
- Medium output power, +11dBm typ.
- High gain, 30dB typ.
- Good flatness, ±1.0dB typ.
ZHL-20W-13SW/X+
- High power, 20W
- Protected against overheat – shuts off automatically at about +100°C case temperature
- Protected against overvoltage – shuts off automatically at about +29V (excluding fan)
- Excellent gain flatness, ±1.2dB typ.
- RF built-in switch with TTL/CMOS control
- Class A amplifier
ZHL-5W-1/X+
- High power, 5W
- Wideband, 5MHz to 500MHz
- High power output, +37dBm min.
- High gain, 40dB min.
- Low noise figure, 4dB typ.
- High IP3, +49dBm typ.
ZHL-100W-52-S+
- High power, 100W
- Excellent IP3, +58dBm typ.
- Class A amplifier, usable up to 100W
- No damage with an open or short output load under full CW output power
- Shuts off when base plate temperature exceeds +100°C
- Internal power regulator (current remains constant over 22 to 28V)
ZHL-50W-GAN+and ZHL-50W-GANX+
- High output power, 50W
- High output IP2, +80dBm typ.
- High output IP3, +55dBm typ.
- Reverse polarity protected
- Unconditionally stable
- Protected by US patent 7,348,854
ZHL-2425+
- High output power, 300W
- High gain, 42dB typical
- 2.4GHz to 2.5GHz ISM band

Applications

ZHL-100W-52-S+
- VHF/UHF transmitters
- Defense
- Amateur radio, FM, TV
- Laboratory use
ZHL-20W-13SW/X+
- VHF/UHF transmitters
- Defense
- Amateur radio, FM, TV
ZHL-5W-1/X+
- VHF/UHF
- Instrumentation
- Laboratory
ZHL-50W-GAN+and ZHL-50W-GANX+
- Broad-based test laboratory amplifiers
- Test setup driver amplifiers
- VHF test amplifiers
- Amplifiers for burn-in test setups
ZHL-10M4G21W0+ and ZHL-10M4G21W0X+
- Communication systems
- R&D, production, and OTA test systems
- Test and measurement equipment
- Laboratory

ZHL-2010+
- VHF/UHF
- Cellular
- Test equipment
- Instrumentation
- Laboratory
ZHL-2425+
- Industrial
- Scientific
- Medical
ZHL-32A+
- HF/VHF
- Instrumentation
- Communication systems
- Laboratory
ZHL-4240W+
- Communication systems
- Cellular
- Instrumentation
- Laboratory

Mini-Circuits ZHL Series Amplifiers

Features

Applications

husseinkey ELECTRONICS®

COMPANY