onsemi NCD83591 Motor Drivers

onsemi NCD83591 Motor Drivers are easy-to-use, multi-purpose 3-phase gate drivers optimized for low BOM cost. The onsemi drivers offer a wide operating voltage range. This feature makes the device ideal for industrial and commercial applications from 5V (min) up to 60V (max).

Features

Operation from 5V to 60V supply voltage with tolerance from 4V to 70V
Constant current drive of power FET, configurable from 5mA to 250mA (16 settings by input level to VDRV pin)
Internally generated gate drive supply voltages
Tolerant to -12VDC for high side gate and source output pins
Gate sensing for cross-conduction protection and optimized dead time
Embedded high GBW general purpose amplifier (intended for current sensing and externally configurable)

Embedded charge pump function allowing DC static drive
Strong hold-off current preventing self-turn-on
Internal gate pull−down to GND during Loss of V_DD (core) power
Under voltage lockout on VM, VGL, and VGH-VM
5V/3.3V compatible six input control plus enable
Up to 30kHz motor PWM with the individual six-gate control mode
4kV HBM and 1kV CDM ESD protection
This device is Pb-free

Applications

Power tools
Industrial actuators and cobots

Automated guided robots
Light mobility (E-bikes, E-scooters, hoverboards)

onsemi NCD83591 Motor Drivers

Features

Applications

APPLICATION CIRCUIT

husseinkey ELECTRONICS®

COMPANY