Switchcraft Low Profile PCB Mount DC Power Jacks

Switchcraft Low Profile (LP) PCB Mount DC Power Jacks offer a low 5.8mm (0.230″) profile for use in compact electronic devices. The LP Power Jacks provide a reduced distance from the PCB to the center of the jack. The overall design remains the same. The height difference is the only change allowing the jacks to still mate with standard plugs from Switchcraft or other manufacturers. The Low Profile PCB Mount DC Power Jacks are available with a full range of center pin diameters and bushing lengths with standard and high-temperature options.

Features

30% lower profile than standard height DC power jacks (0.330″ to 0.230″ low profile)
Mates with standard plugs
Full range of center pin diameters and bushing lengths
Standard and high-temperature options

Made in the USA
Included hardware
- 1x P2439 nickel-plated brass hex nut
- 1x P2441 nickel-plated steel flat washer

Specifications

Electrical
- Contact resistance
  - 0.01Ω maximum initial
  - 0.02Ω maximum after humidity/durability exposure
  - 0.1Ω maximum after salt
- Insulation resistance
  - 10,000MΩ minimum initial
  - 1000MΩ minimum after humidity/durability exposure
- 500V_AC maximum dielectric withstanding voltage
- Contact rating
  - 5A at 12V_DC resistive for standard components
  - 7.5A at 12V_DC resistive for high-temperature components
Temperature ranges
- -55°C to +85°C for standard components
- -40°C to +105°C for high-temperature components

Mechanical
- 10,000 minimum insertion/withdrawal cycle
- Force
  - 3-pound maximum for insertion
  - 4-ounce minimum withdrawal
Measurements
- ø1.3mm to ø2.5mm pin range
- 5.5mm or 8.1mm bushing length options
- 5.8mm profile
Materials
- Molded plastic housing
- Plated copper alloy mounting bushing, hex nut, pin, spring, and terminals
- Rigid plastic insulators

Switchcraft Low Profile PCB Mount DC Power Jacks

Features

Specifications

husseinkey ELECTRONICS®

COMPANY