onsemi NCS35011 5S Battery Protectors

onsemi NCS35011 5S Battery Protectors are ultra-low power protection integrated circuits that manage lithium-ion batteries from three to five cells. The protectors offer accurate battery voltage indications up to 5 LED outputs.

Each cell in the battery pack is monitored for overvoltage and undervoltage conditions. When an overvoltage is detected, the ODI pin will assert, indicating a fault condition, and stay asserted until the fault is cleared.

During an under-voltage condition, the UDI pin will also assert indicating the fault but will have a pre-set pulse width in the protector. Over- and under-voltage detections have a hard-coded pre-set delay time before fault indication.

Features

Over-Voltage (OV) and Under-Voltage (UV) detection
Protection for 3, 4, and 5 series cells
State of Charge (SoC) indication with high voltage tolerant LED drivers
Configurable fault outputs (active high or low for push-pull or open-drain)

High-accuracy voltage measurement of ±5mV
Low power consumption I_cc = 4A
Input BAT voltage range from 5V to 28V, tolerant to 70V for increased immunity to surge
Extended junction temperature range to +125°C
These devices are Pb-free and RoHS compliant

Applications

Secondary protection
Power and gardening tools

Portable/autonomous equipment (cleaners, mowers, motive, medical)

onsemi NCS35011 5S Battery Protectors

Features

Applications

Simplified Block Diagram

MARKING DIAGRAM

husseinkey ELECTRONICS®

COMPANY