Future Designs, Inc. (FDI) µEZ® GUI Board Assembly & Dev Kit

Future Designs, Inc. (FDI) µEZ® GUI Board Assembly and Development Kit offers enhanced processing capabilities to FDI’s standalone microcontroller-based µEZ GUI family. The uEZGUI-4357-70WVN-BA is based on the NXP LPC4357 microcontroller with Floating Point Unit and high-speed SPIFI Flash. The board is optimal for math-intensive applications, including high-speed graphics processing.

The FDI GUI Board is designed to be used as an “off-the-shelf” Graphical User Interface (GUI) or Human Machine Interface (HMI) in a variety of end-customer applications. The small, self-contained design is well suited to be embedded directly into products, and FDI has available prepackaged versions for standalone use.

Features

Microcontroller-based intelligent HMI GUI
7.0″ WVGA projected capacitive touch screen LCD
µEZ / FreeRTOS rapid software development platform
16MB SDRAM and 16MB SPIFI Flash

ARM Cortex-M4F 204MHz MCU with 1MB internal Flash
Expansion with UART, I²C, SPI, ADC, GPIO, USB Host/Device, and RMII

Software

μEZ / FreeRTOS rapid development platform
MicroSD card appears as a USB Flash drive to the PC

Rowley CrossWorks compiler and tool suite
Segger J-Link for programming and debugging

Specifications

LPC4357 204MHz Cortex-M4 and -M0 microcontrollers
SDRAM 16MB, optional up to 32MB
SPIFI Serial Flash 16MB
Internal on-chip 4KB EEPROM
RTC – Real Time Clock with optional supercapacitor backup
Temperature sensor
3-Axis accelerometer
Speaker

Micro-SD Card socket for up to 64GB SDHC storage, microSD card included with kit only
Mini JTAG connector
PMOD Type 2A connector
Power-on Reset Generator – power-on reset supervisor and voltage monitor (SW1)
Expansion Connector for customer-specific applications

Kit Contents

5.0” PCAP touch screen LCD GUI production module
SEGGER J-Link™ Lite Cortex-M probe
9-Pin ribbon cable (keyed)
2x USB Type A to USB Type Mini-B USB cables
Universal AC to 5V USB plug power supply unit

Expansion board for μEZ GUI with 70-pin breakout and optional RS232
- Note: The 4-bit microSD card slot is not designed for this μEZ GUI (UEZGUI-EXP-BRKOUT)
20-Pin and 50-Pin Flex cable

Future Designs, Inc. (FDI) µEZ® GUI Board Assembly & Dev Kit

Features

Software

Specifications

Kit Contents

UEZGUI-4357-70WVN-BA Block Diagram

husseinkey ELECTRONICS®

COMPANY