Renesas Electronics HIP2211EVAL2Z Evaluation Board

Renesas HIP2211EVAL2Z Evaluation Board provides a comprehensive and versatile platform for evaluation of the HIP2211 N-channel MOSFET half-bridge driver. The HIP2211EVAL2Z Board is designed for 60V half-bridge applications with 12V supply to bias the V_DD of the HIP2211 IC.

The Renesas HIP2211EVAL2Z Evaluation Board includes the MOSFETs with a dual footprint for TO220 and DPAK. Additionally, the board features an inductor-capacitor output filter for evaluating an open-loop type synchronous buck DC/DC converter where the output voltage is controlled through the duty cycle of the signals into the HI/LI pins.

Features

3A source and 4A sink NMOS gate drivers
Internal level shifter and bootstrap diode for gate driver on high-side NFET
Up to 100V high-side bootstrap reference

6V to 18V bias supply operation
Fast 15ns typical propagation delay and 2ns typical propagation delay match supports up to 1MHz operation

Specifications

This board is optimized for the following operating conditions:
- 12V nominal VDD supply
- 0V to 60V VBRIDGE supply input
- 100kHz PWM switching frequency
- 3A Source and 4A sink peak gate drive current

Required Equipment

A power supply that can deliver 12V or higher with at least 2A source current capability
A power supply that can deliver 60V or higher to bias the half bridge
A pulse generator with 0V to 5V logic level output and 100kHz capability
- Optional: A pulse generator with two synchronizable 0V to 5V logic level outputs and 100kHz capability
A minimum 4-channel oscilloscope to monitor LI, HI, LO, HO, and HS signals
- Optional: A DC electronic load to draw current out of the LC filter output

Renesas Electronics HIP2211EVAL2Z Evaluation Board

Features

Specifications

Required Equipment

Front & Back Layout

husseinkey ELECTRONICS®

COMPANY