Analog Devices / Maxim Integrated MAX2000xEEVKIT Evaluation Kits

Analog Devices Inc. MAX2000xEEVKIT Evaluation Kits demonstrate the MAX2000xE high-voltage, current-mode, synchronous step-down converters with a low operating current. The MAX2000xE Eval Kits operate over a wide 3.5V to 36V input range, and a 3.9V output is set in the default configuration but can be adjusted between 1V and 5V with appropriate components.

ADI MAX2000xEEVKIT Evaluation Kits have a switching frequency set for 2.1MHz (MAX20006EEVKIT#) or 400kHz (MAX20008EEVKIT#) in the default configuration. The switching frequency is fixed internally and can be synchronized to an external signal within the specified range. The MAX2000xEEVKIT Eval Kits can be set for fixed-frequency (PWM mode) or pulse-skipping (SKIP mode) for light-load efficiency through the supplied onboard jumper.

Features

3.5V to 36V Input supply range
15µA No-load quiescent current in skip mode
High-efficiency synchronous DC-DC converter with integrated FETs
External frequency synchronization (SYNC) input
Internal Soft-start

Fixed 3.3V/5.0V/3.9V output or resistor programmable 1V to 5V output
Low dropout (98% effective duty cycle operation)
±2% Output voltage accuracy
Active-low RESET output
Fully assembled and tested

Applications

ADAS
Distributed DC power systems

Navigation and radio head units
Point-of-load applications in automotive

Analog Devices / Maxim Integrated MAX2000xEEVKIT Evaluation Kits

Features

Applications

husseinkey ELECTRONICS®

COMPANY