Analog Devices / Maxim Integrated MAX17691AEVKIT Converter Evaluation Kit

Analog Devices Inc. MAX17691AEVKIT Converter Evaluation Kit provides a proven design to evaluate the performance of MAX17691A IC. This fully assembled and tested circuit uses the MAX17691A, the no-opto, flyback converter with an integrated power FET, available in a 12-pin TDFN package with an exposed pad. ADI MAX17691AEVKIT output is configured for an isolated +5V and provides up to 1.5A of output current over an 18V to 36V input range. The device switches at a 150kHz switching frequency. The evaluation kit regulates the output voltage within ±5% over the line, load, and temperature by sensing the output voltage on the primary side. The converter does not need an optocoupler for the isolated-output voltage sensing.

Features

18V to 36V input range
5V/1.5A_DC isolated output
Compact design with high frequency (150kHz) switching
86% peak efficiency
Resistor programmable input enable/UVLO protection
Resistor programmable input overvoltage protection
Internal loop compensation reduce external components
5mS internal soft-start time
Temperature compensated output voltage over -40°C to +125°C operating temperature

Provision to external clock synchronization and frequency dithering
V_CC overdrive
Minimum number of external components
Complies with CISPR22(EN55022) Class B radiated emissions
Proven PCB layout
Fully assembled and tested

Required Equipment

MAX17691AEVKIT evaluation kit
One 18V to 36V DC, 1.5A power supply

7.5W resistive load with 1.5A sink capacity
Four digital multimeters (DMM)

Analog Devices / Maxim Integrated MAX17691AEVKIT Converter Evaluation Kit

Features

Required Equipment

husseinkey ELECTRONICS®

COMPANY