STMicroelectronics STM32H735G-DK Discovery Kit

STMicroelectronics STM32H735G-DK Discovery Kit is a complete demonstration and development platform for the Arm® Cortex®-M7 core-based STM32H735IGK6U Microcontroller. The STM32H735IGK6U MCU features 1Mbyte of Flash memory and 564Kbytes of SRAM, along with a wide range of peripherals, including three ADCs, two DACs, two ultra-low power comparators, a low-power RTC, a high-resolution timer, 12 general-purpose 16-bit timers, two PWM timers for motor control, five low-power timers, and a true random number generator (RNG).

The STM32H735G-DK Discovery Kit is used as a reference design for user application development before porting to the final product, thus simplifying the application development.

The STM32H735G-DK Board includes a 4.3″ 480 x 272 LCD TFT Display Panel with capacitive touch, which is connected to the RGB interface through a 50-pin connector. The full range of hardware features available on the Discovery Kit helps users to enhance their application development by an evaluation of all the peripherals. Arduino Uno V3, Pmod™, and STMod+ connectors provide easy connection to extension shields or daughterboards for specific applications.

STLINK-V3E is integrated into the board as the embedded in-circuit debugger and programmer for the STM32 MCU and USB Virtual COM port bridge.

STMicroelectronics STM32H735G-DK Discovery Kit comes with the STM32CubeH7 MCU Package, which provides a comprehensive STM32 software HAL library as well as various software examples.

Features

STM32H735IGK6U Microcontroller in a UFBGA176+25 package
4.3″ TFT 480 x 272 pixels colored LCD module with a capacitive touch panel and RGB interface
Ethernet compliant with IEEE-802.3-2002 and PoE (Power over Ethernet)
USB OTG FS
SAI audio codec
One ST-MEMS digital microphone
512Mbit Octal-SPI NOR Flash memory
128Mbit HyperRAM
Two user LEDs
User and reset push-buttons
Fan-out daughterboard
Three CAN FDs
On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
Comprehensive free software libraries and examples available with the STM32CubeH7 MCU Package
Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil^®, and STM32CubeIDE

Flexible power-supply options
- STLINK-V3E USB connector
- USB OTG FS connector
- 5V delivered by RJ45 (Power over Ethernet)
- 5V delivered by Arduino
- USB charger
Board connectors
- USB FS Micro-AB
- USB ST-LINK Micro-B
- Ethernet RJ45
- Stereo headset jack including analog microphone input
- Audio header for external speakers
- microSD™ card
- TAG connector 10-pin footprint
- SMA connector
- Arm Cortex 10-pin 1.27mm-pitch debug connector over STDC14 footprint
- Arduino Uno V3 expansion connector
- STMod+ expansion connector
- Pmod Type-2A and Type-4A expansion connector
- Audio MEMS daughterboard expansion connector