Swissbit x-86m2 Industrial M.2 SATA Solid State Drives

Swissbit x-86m2 Industrial M.2 SATA Solid State Drives (SSDs) are available in 10GB, 20GB, 40GB, 80GB, and 160GB capacities. The X-86m2 SSDs feature active and passive data care management, onboard power-fail protection, ATA security feature set support, in-field firmware update, and AES128 and AES256 encryption. Swissbit x-86m2 Industrial M.2 SATA SSDs incorporate the Swissbit Life Time Monitoring (SBLTM) tool and SDK for SBLTM. The drives are available in an m.2 2242 type (42mm x 22mm x 3.58mm) form factor.

Features

Dynamic and static wear leveling
Subpage mode flash translation layer (FTL)
Adaptive read refresh active data care management
Dynamic bad block remapping / Write amplification reduction lifetime enhancements
Onboard power-fail protection
TRIM and NCQ support
ATA security feature set support
DEVSLP compatible
Enterprise-grade self-monitoring, analysis, and reporting technology (S.M.A.R.T.)
30μ” gold-plated connector (IPC-6012B Class 2 compliant)

End-to-end (E2E) data protection
Advanced protection against radiation and soft-errors with SRAM ECC and low-alpha package
AES-128 and AES-256 encryption support with CBC and XTS modes (on request)
TCG opal 2.0 compliant and secure-boot features (on request)
On-die temperature sensor
Life cycle management, controlled “locked” BOM
RoHS 6 compliant
In-field firmware update, Swissbit lifetime monitoring (SBLTM) tool and SDK

Specifications

10GBytes, 20GBytes, 40GBytes, 80GBytes, 160GBytes (3D pSLC) capacities
m.2 2242 type (42mm x 22mm x 3.58mm) acc. PCI-SIG form factor
SATA Gen3 to 6Gbit/s (Gen2 to 3Gbit/s and Gen1 to 1.5Gbit/s backward compatible) interface
Supports ATA/ATAPI-8 and ACS-4 command sets
Performance
- Up to 600MBytes/s in SATA Gen3 to 6.0Gbit/s burst transfer rate
- Sequential read up to 360MBytes/s, random read 4K up to 15,000 IOPS read performance
- Sequential write up to 224MBytes/s, random write 4K up to 9000 IOPS write performance
Operating temperature range
- 0°C to +70°C commercial
- -40°C to +85°C industrial

-40°C to +85°C storage temperature range
3.3V ±5% operating voltage
≤1386mW / ≤400mA power (maximum)
10 years @ life begin; 1 year @ life end data retention
JEDEC enterprise workload typical 3.1 (depends on drive configuration) endurance in drive writes per day (DWPD)
1500g shock / 50g vibration
High-performance 32-bit processor with integrated, parallel flash interface engines
- Triple-level cell (TLC) 3D NAND flash in pSLC mode
- Flexible BCH and GCC ECC engines provide superior error-correction performance
Mean time between failure (MTBF): >2,000,000 hours @ +25°C high reliability
<1 non-recoverable error per 10¹⁶ bits read data reliability

Swissbit x-86m2 Industrial M.2 SATA Solid State Drives

Features

Specifications

husseinkey ELECTRONICS®

COMPANY