Fanstel BC805M Bluetooth Low Energy, BLE 5.2 Modules

Fanstel BC805M Bluetooth Low Energy, BLE 5.2 Module is a powerful, highly flexible module that features the Nordic nRF52805 SoC. It has an ARM® Cortex® M4 MCU, 192KB flash, 24KB RAM, embedded 2.4GHz multi-protocol transceiver, and an integrated PCB trace antenna. It allows faster time to market with reduced development cost.

The Nordic nRF52832 Development Kit is recommended for programming this evaluation board.

Features

Nordic nRF52805 with ARM Cortex M4
2Mbps and 1Mbps data rate
192KB flash, 24KB RAM
Bluetooth range, estimated: 200 meters at 1Mbps with at least 60% Fresnel zone clearance
AES HW encryption with EasyDMA
Serial Wire Debug (SWD)
Support SoftDevice S112, S113 soon
Supports Bluetooth Channel Selection Algorithm #2 improving coexistence and reducing interference
Over-The-Air (OTA) firmware update
32MHz crystal on board
Inductors for DCDC converter on board
Size 10×14.3×1.9mm
10 GPIOs
- 2x real-time counter (RTC)
- 3x 32-bit timers with counter mode
- UART, SPI, TWI
- 2 x 12bit ADC
- Programmable peripheral interconnect (PPI)

Power:
- Operation voltage: 1.7V to 3.6V
- Peak current: 4.6mA RX, 4.6mA TX at 0dBm
RF Performance
- RX sensitivity: -97dBm at 1Mbps
- TX power: -20 to +4dBm
Miscellaneous
- Operation Temperature: -40°C to +85°C
- Integrated shield to resist EMI
- Evaluation board: EV-BC805M
- Availability: Production
Certifications:
- FCC ID: X8WBC805M
- ISED (Canada) ID: 4100A-BC805M
- CE: Compliant (including EN300 328 V2.2.2)
- Japan: TELEC 201-200778/00
- Australia: Compliant
- QDID: 138610

Fanstel BC805M Bluetooth Low Energy, BLE 5.2 Modules

Features

Block Diagram

husseinkey ELECTRONICS®

COMPANY