• support@husseinkey.com
  • livechat
contact us

View Datasheet

STMicroelectronics STM32MP157D-EV1 Evaluation Board

STMicroelectronics STM32MP157D-EV1 Evaluation Board is designed to evaluate the features of 800MHz Arm-based dual Cortex®-A7 32-bits and Cortex®-M4 32-bits STM32MP1 MPUs. This board with STM32MP1 MPUs helps to develop the applications using STM32 MPU OpenSTLinux distribution software for the main-processor and STM32CubeMP1 software for the co-processor. The STM32MP157D-EV1 board includes ST-LINK embedded debug tool, LEDs, push-buttons, joystick, 1-Gbps Ethernet, CAN FD, USB OTG Micro-AB connector, and four USB Host Type-A connectors. This board also includes an LCD display with a touch panel, camera, stereo headset jack with analog microphone input, one SPDIF Rx/Tx, and four digital-microphones. To expand the functionality of the STM32MP157D-EV1 evaluation board, two GPIO expansion connectors are available for motor control and Raspberry Pi shields.

Features

  • STM32MP157 Arm-based dual Cortex®-A7 800MHz 32-bits and Cortex®-M4 32-bits MPU in LFBGA448 package
  • ST PMIC STPMIC1
  • 2x 4Gb DDR3L, 16-bits, and 533MHz
  • 2x 512Mb Quad-SPI Flash memory
  • 32Gb eMMC v5.0
  • 8Gb SLC NAND, 8-bits, 8-bit ECC, and 4KBPS
  • 1Gb/s Ethernet (RGMII) compliant with IEEE-802.3ab
  • USB Host 4-port hub
  • USB OTG HS
  • CAN FD
  • 5.5″ TFT 720 x 1280 pixels with LED backlight, MIPI DSISM interface, and capacitive touch panel
  • SAI audio codec
  • 5-megapixel and 8-bit camera
  • 4x ST-MEMS digital microphones
  • Smartcard
  • microSD™ card
  • 2 user LEDs
  • 2 user and reset push-buttons and 1 wake-up button
  • 4-direction joystick with a selection button
  • 5V/4A power supply
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability:
    • Virtual COM port and debug port
  • Board connectors:
    • Ethernet RJ45
    • 4x USB Host Type-A
    • USB OTG Micro-AB
    • SPDIF RCA input and output
    • CAN FD
    • Stereo headset jack including analog microphone input
    • Audio jack for external speakers
    • Motor control
    • External I2C
    • LTDC
    • Trace, JTAG, and RS-232
    • GPIO expansion connector (Raspberry Pi shields capability)
    • MEMS-microphone daughterboard expansion connector
  • STM32CubeMP1 and full mainline open-source Linux® STM32 MPU OpenSTLinux Distribution (such as STM32MP1Starter) software and examples
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE

husseinkey ELECTRONICS®

  • supptor@husseinkey.com
  • Live Chat

COMPANY

  • Privacy Center
  • Terms and Conditions
  • Accessibility
  • Sitemap
  • xxxxxxxxxxxx
  • admin@admin.com
  • livechat
STMicroelectronics STM32MP157D-EV1 Evaluation Board