http://www.ti.com/general/docs/suppproductinfo.tsp?distId=26&gotoUrl=https%3A%2F%2Fwww.ti.com%2Flit%2Fpdf%2Fscdu018″>View Datasheet

Texas Instruments TMUX7208EVM Multiplexer Evaluation Module (EVM)

Texas Instruments TMUX7208EVM Multiplexer Evaluation Module (EVM) supports the evaluation of the TMUX7208 devices in the 16-pin TSSOP (PW) package. This evaluation module can be used for quick prototyping and testing of the TMUX7208 devices, specifically for DC and timing parameters. The Texas Instruments TMUX7208 is a complementary metal-oxide semiconductor (CMOS) switch with latch-up immunity in an 8:1 single-channel configuration. The device supports dual supplies (±4.5V to ±22V), a single supply (4.5V to 44V), or asymmetric supplies (such as V_DD = 12V, V_SS = –5V).

Features

Quick prototyping and testing setup for the 16-pin TMUX7208 device in the TSSOP (PW) package
TMUX7208 control logic truth table listed on board
No specific TMUX7208 is supplied or soldered to the evaluation module
Allows flexibility to choose the desired IC for evaluation
Support for both single supply and dual supply operation
Six power supply decoupling capacitors (2 × 0.1μF, 2 × 1μF, and 2 × 10μF)

Jumpers to nine signal lanes, V_DD and V_SS power rails, and control signals
Nine pads are available for placement of SMA connectors
The pads are available for pull-up or pull-down resistors on control signal pathways
The pads are available for surge protection diodes
0805 capacitor pads are available on all signal pathways referenced to ground

Texas Instruments TMUX7208EVM Multiplexer Evaluation Module (EVM)

Features

Board Layout

husseinkey ELECTRONICS®

COMPANY