Jorjin WG7833-B0 2.4/5GHz Wi-Fi® & BLUETOOTH® SiP Module

Jorjin Technologies WG7833-B0 2.4/5GHz Wi-Fi^® and BLUETOOTH^® SiP Module is based on the WL1833 SoC from Texas Instruments. The WG7833-B0 SiP Module features a crystal, power amplifier, Tx filter, Tx/Rx switch, and the necessary passive components to fully implement the 802.11a,b,g,n WiFi and BLUETOOTH 4.2 functions.

The Jorjin WG7833-B0 WLAN SiP Module is connected to the host processor via a 1.8V SDIO interface, and the BLUETOOTH is connected via a UART. Linux and Android drivers are provided for a wide range of application processors.

Features

WLAN, BLUETOOTH, BLE with integrated RF Front-End Module (FEM), Power Amplifier (PA), and power management on a single module
LGA106 pin package
Provides efficient direct connection to battery by employing several integrated switched mode
Power supplies (DC2DC)
Seamless integration with TI Sitara™ and other application processors

WLAN and BT/BLE cores are software and hardware compatible with prior WL127x and WL128x offerings, for smooth migration to device
Shared HCI transport for BT/BLE over UART and SDIO for WLAN
Temperature detection and compensation mechanism ensures minimal variation in RF performance over the entire temperature range
BT 4.2, BLE and all audio processing features work in parallel and include full coexistence with WLAN

Applications

Mobile devices
Audio
Computer

PDA
Embedded systems

Specifications

TI WL1833 Chipset
IEEE 802.11 a/b/g/n & BT(2.1/3.0/4.2) WLAN
FCC/IC/CE/NCC/TELEC Certification

12.8mm x 12.0mm x 1.63mm Dimension
-40°C ~ 85°C Operating temperature
SPI Interface

Jorjin WG7833-B0 2.4/5GHz Wi-Fi® & BLUETOOTH® SiP Module

Features

Applications

Specifications

Block Diagram

husseinkey ELECTRONICS®

COMPANY