http://www.ti.com/general/docs/suppproductinfo.tsp?distId=26&gotoUrl=https%3A%2F%2Fwww.ti.com%2Flit%2Fpdf%2Fdlpu109″>View Datasheet

Texas Instruments DLPC7540EVM DLP Evaluation Module (EVM)

Texas Instruments DLPC7540EVM DLP Evaluation Module (EVM) offers a reference design to enable faster development for users of the DLPC7540 chips. When combined with the DLP471TEEVM or DLP650TEEVM, the user can accelerate the prototyping time of a DLP 4K UHD system. The DLPC7540EVM provides a solution for driving either the 0.47-inch 4K UHD or 0.65-inch 4K UHD standard digital micromirror devices (DMDs) while allowing for testing, with included Vx1 interface front-end system. The combination of the Texas Instruments DLPC7540EVM with either the DLP471TEEVM or DLP650TEEVM can display SPLASH, test patterns, or video from the HDMI source on the DMD.

Features

Supports up to 4K UHD at 60Hz
Supports up to 1080p at 240Hz (2D) and 120Hz (3D)
Supports LED, RGB laser, and laser phosphor illuminations

Major Components of the DLPC7540EVM

• One DLPC7540 controller
• Three DLPA100 power management and motor driver chips
• One Vx1 front-end capable of processing inputs up to 4K at 60Hz at a 600MHz pixel clock

Required Equipment

Power supply – Required for evaluation operation (not included)
- Nominal voltage: 12V DC -5%/+10%
- Maximum Output Current: 7A
- DC connector size
  - Inner diameter: 2.5mm
  - Outer diameter: 5.5mm
- Shaft: 9.5mm female, center positive
- Efficiency level: V

Micro-USB cable: A to Micro B USB cable – Required for GUI interface
Optics
Illumination module and source
XPR actuator

Texas Instruments DLPC7540EVM DLP Evaluation Module (EVM)

Features

Major Components of the DLPC7540EVM

Required Equipment

System Block Diagram

husseinkey ELECTRONICS®

COMPANY