TDK InvenSense ICP-10125 Pressure & Temperature Sensor IC

TDK InvenSense ICP-10125 Pressure and Temperature Sensor IC is based on MEMS capacitive technology that provides ultra-low noise at low power. This enables the sensor IC to provide industry-leading relative accuracy, sensor throughput, and temperature stability. The ICP-10125 sensor IC can measure pressure differences with an accuracy of ±1Pa. This accuracy enables altitude measurement differentials as small as 8.5cm. The ICP-10125 IC consumes only 1.3µA at 1Hz and is available in a small footprint 3.55mm x 3.55mm x 1.45mm chimney package with waterproofing gel. This gel provides IPx8 waterproofing up to 10ATM. The sensor IC offers an industry-leading temperature coefficient offset of ±0.5Pa/°C and operates within -40°C to 85°C temperature range. Applications include smart watches, altimeters and barometers for a portable device, home and building automation, and weather forecasting.

Features

30kPa to 110kPa pressure operating range
Noise and current consumption:
- 0.4Pa @ 10.4µA (ULN mode)
- 0.8Pa @ 5.2µA (LN mode)
- 3.2Pa @ 1.3µA (LP mode)
Pressure sensor relative accuracy:
- ±1Pa for any 10hPa change over 950hPa to 1050hPa @ 25°C
Pressure sensor absolute accuracy:
- ±1hPa over 950hPa to 1050hPa @ 0°C to 65°C
Pressure sensor temperature coefficient offset:
- ±0.5Pa/°C over 25°C to 45°C @ 100kPa

±0.4C temperature sensor absolute accuracy:
- IPx8 waterproof to 10ATM
-40°C to 85°C temperature operating range
I²C host interface at up to 400kHz
1.8V ±5% single supply voltage
RoHS and Green compliant

Applications

Smart watches
Leisure, sports, and fitness activity monitoring for wearable sensors
Altimeters and barometers for portable devices

Indoor/outdoor navigation (dead-reckoning, floor/elevator/step detection)
Home and building automation
Weather forecasting

TDK InvenSense ICP-10125 Pressure & Temperature Sensor IC

Features

Applications

Block Diagram

TYPICAL OPERATING CIRCUIT

husseinkey ELECTRONICS®

COMPANY