Digilent MCC 118/128 Voltage DAQ HAT for Raspberry Pi

Digilent MCC 118/128 Voltage DAQ HAT for Raspberry Pi feature eight channels of analog voltage measurement for Raspberry Pi-based data acquisition systems. Each device has a maximum sample rate of 100kS/s for taking single point or waveform voltage measurements. Up to eight MCC HATs can be stacked onto one Raspberry Pi – providing up to 64 channels of data and a maximum throughput of 320 kS/s. The MCC 118 features 12-bit resolution and 8 SE analog inputs with a +/-10V input range. MCC 128 features 16-bit resolution and 8 SE/ 4 DIFF analog inputs with the following input ranges (+/-10 V, +/-5 V, +/-2 V, +/-1 V).

Features

MCC 118:
8 SE 12-bit voltage inputs
100kS/s max sample rate (320kS/s aggregate for stacked boards)
+/-10V input range
Onboard sample buffers allow high-speed acquisition
External scan clock I/O
External digital trigger input
Screw terminal connections

MCC 128:
8 SE/4 DIFF 16-bit voltage inputs
100kS/s max sample rate (320kS/s aggregate for stacked boards)
Multiple input ranges (+/-10V, +/-5V, +/-2V, +/-1V)
Onboard sample buffers allow high-speed acquisition
External scan clock
External digital trigger input
Screw terminal connections

Kit Contents

One MCC DAQ HAT (choose between MCC 118 and MCC 128)
2×20 Header connector (plugs into the 40-pin GPIO connector on the Pi board)
Jumpers (3)
Standoffs (4)

Screws (4)
Nuts (4)
Printed insert: Getting Started with MCC DAQ HATs
MCC packaging assembly/foam, etc.

Digilent MCC 118/128 Voltage DAQ HAT for Raspberry Pi

Features

Kit Contents

husseinkey ELECTRONICS®

COMPANY