SEGGER Microcontroller (Q)SPI Flash Evaluator

SEGGER Microcontroller (Q)SPI Flash Evaluator facilitates the evaluation of the performance of NOR and NAND emFile drivers. The easy-to-use (Q)SPI flash evaluator board enables testing of direct and indirect programming of serial flash devices by SEGGER J-Link to debug probes and production programmers.

The (Q)SPI Flash Evaluator is part of the Flasher family of programming tools that offer reliable, high-speed programming for microcontrollers and memory devices.

Serial flash devices are soldered onto an adapter board, initiating the evaluator. The adapter board then plugs into the mainboard through an 8×2 adapter header. Different adapter boards are available for the other package types, including SO-8, SO-16, BGA, and SON.

Components

ST STM32H743 ARM Cortex-M7 microcontroller
Two 8-pin headers for connecting the flash adapter board
20-pin header for direct flash programming
19-pin header for indirect flash programming and debugging

One power and one status LED
Jumper for the voltage level selection of flash power supply (3.3V / 1.8V)
USB micro connector for power supply

Kit Contents

(Q)SPI Flash Evaluator carrier board
3 Adapter boards for SO-8, SO-8W, SO-16 (blank PCB board)
3 Adapter boards for BGA 4x6mm and 5x5mm (blank PCB board)

3 Adapter boards for SON/DFN 8×6, 6×5, 4×4, 3×4, 3×2 (blank PCB board)
6 connectors

SEGGER Microcontroller (Q)SPI Flash Evaluator

Components

Kit Contents

Overview

husseinkey ELECTRONICS®

COMPANY