SparkFun RP2040 mikroBUS Development Board

SparkFun RP2040 mikroBUS Development Board features the Raspberry Pi Foundation’s RP2040 microcontroller. The board features a Thing Plus or Feather PTH pin layout, microSD card slot, 16MB (128Mbit) flash memory, and a JST single-cell battery connector. The battery connector has a charging circuit and fuel gauge sensor. The board also features an addressable WS2812 RGB LED, JTAG PTH pins, four (4-40 screw) mounting holes, our signature Qwiic connectors, and a mikroBUS socket.

Features

Raspberry Pi Foundation’s RP2040 microcontroller
16MB QSPI Flash Memory
JTAG PTH Pins
Thing Plus (or Feather) Pin Form-Factor
- 18x Multifunctional GPIO Pins
  - Four available 12-bit ADC channels with an internal temperature sensor (500kSa/s)
  - Up to eight 2-channel PWM
  - Up to two UARTs
  - Up to two I²C buses
  - Up to two SPI buses
USB-C Connector
- USB 1.1 Host/Device functionality
2-pin JST Connector for a LiPo Battery (not included)
- 500mA charging circuit

Qwiic Connectors (x2)
mikroBUS Socket
Buttons
- Boot
- Reset
LEDs
- PWR – Red 3.3V power indicator
- CHG – Yellow battery charging indicator
- 25 – Blue status/test LED (GPIO 25)
- WS2812 – Addressable RGB LED (GPIO 08)
Four Mounting Holes
- 4-40 screw compatible
Dimensions 2.3″ x 0.9″

SparkFun RP2040 mikroBUS Development Board

Features

Videos

husseinkey ELECTRONICS®

COMPANY