NXP Semiconductors PTN3222 Evaluation Board

NXP Semiconductors PTN3222 Evaluation Board is an easy-to-use evaluation board with a mounted PTN3222CUK. The NXP board features SMP connectors available on the eUSB2 interface. Type-C, uB, or standard A connectors are also available on the USB2 interface. The onboard I²C header can configure (read/write) PTN3222CUK internal registers.

Features

1-Port eUSB2 to USB2 Redriver
PTN3222CUK performs translation between eUSB2 andUSB2 signalling scheme
Supports Host Repeater, Device Repeater, or Dual Role Functions
PTN3222CUK can be configured to operate as host repeater, device repeater, or both (dual role) via I²C
Supports Low Speed (1.5Mbps), Full Speed (12Mbps) and High Speed (480Mbps)
PTN3222CUK supports all three USB2 speeds – LS, FS, and HS
eUSB2 Host/Device Repeater Interface Via SMP Connectors

eUSB2 host, eUSB2 device platforms can be connected to PTN3222CUK-EVB via SMP connectors
USB2 Host/Device Interface Via Type-C, uB, or Standard a Connectors
USB2 connectors are selected via the onboard 0-ohm loading option
I²C Header is Available to Configure PTN3222CUK
I²C header allows the PTN3222CUK to be a connector to the platform I²C host

NXP Semiconductors PTN3222 Evaluation Board

Features

Block Diagram

husseinkey ELECTRONICS®

COMPANY