Kinetic Technologies KTS1693EVB-MMEV01 Evaluation Kit

Kinetic Technologies KTS1693EVB-MMEV01 Evaluation Kit demonstrates and evaluates the KTS1693 functionality, performance, and PCB layout. The kit includes a fully assembled and tested PCB with the Kinetic Technologies KTS1693 IC installed, two pairs of high-current XT30-to-Banana power cables, and a printed copy of the Quick Start Guide.

Required Equipment

Required
- Bench Power Supply for V_IN – 10V/30V and 0.5A/6A, as needed for the intended application
  - For testing over-voltage protection and withstand voltage, a 28V adjustable bench power supply is preferred
- Digital Multimeter – one or more, used to measure input/output voltages and currents
Optional
- Bench Power Supply for V_IO – 1.5V to 5V, low current
  - Needed for shutdown mode (EN = V_IO = High) and power good monitoring (ACOK pull-up voltage)
- Oscilloscope – for dynamic testing of voltages (and currents with a current probe, if available)
- Load – either an eLoad, power resistors or an actual system load
- Additional digital multimeters

Kinetic Technologies KTS1693EVB-MMEV01 Evaluation Kit

Required Equipment

Test Setup Diagram

husseinkey ELECTRONICS®

COMPANY